How To Make Twin Motor RC Model Airplane — DIY Brushless Motor Model Airplane.
е:
How to make 2 brushless motorized remote controlled aircraft from foam board material.
INFORMATION: The Foamboard is made of foam and the outside is paper-covered. It is lightweight, robust and easy to cut. Easily bonded with hot silicone.
All of my videos :
Thank you for watching. Please Remember to Share and Subscribe for More Amazing Videos.
Diagrams for dimensions:
Necessary Materials:
2 pieces of brushless motor 2205 1800-2600KV. (2204 can also be):
2 pieces (CW & CCW)
two Blade 6×4 or three blade 5×4.5 propeller:
30A Brushless ESC (35-40A can be used according to the motors you will use):
11.1V 1300Mah LiPo battery:
3pcs 35-40mm Wheel:
Servo control horn:
4 or 6 channel radio control system:
4 micro servos (may be 9gr servos):
Gold Connectors 3.5mm (for Y cable):
Wheel stopper:
Y extension cable:
L type nylon clevis keper clip:
Adjustable Linkage stopper (Easy Link):
LiPo Battery Balance Charger:
OR
Hot melt Glue Gun:
5mm white foam board (50×70 plate):
5mm kraft foam board (50×70 plate):
Pushrods:
2mm Rod For Landing Gear:
Technicial Specifications:
Lenght: 60 cm
Wing span: 87 cm
Flight weight: About 715 g
Center of gravity: 4-4.5 cm from the front of the wing
Required control system: 4 channels, 4 micro servos
Suitable battery: 11.1V 1300Mah — 1600Mah Lipo battery
Suitable motor: 2205 — 2204 (1800-2400KV)
Suitable propeller: 5×4.5 — 6×4 Источник видео youtube.com/watch?v=PdrjVSdA7_w